User's Manual
Associating your Home Energy Meter to Report Automatically.
Your Home Energy Meter can send Wattage and KWH usage reports to associated devices. To enable this, please refer to
your controller’s manual on how to congure settings on Z-Wave devices linked to your controller. Initially, the meter is set
up to report Watt and KWH reports.
Some gateways/controllers will automatically congure devices enabling you to take full advantage of the Home Energy
Meter’s features. Others may not perform any automatic configuration. In such a case you can choose to manually
congure your meter to output the data that you wish to view.
Setting automatic report ags.
Parameter 101-103 [4 byte dec] can be congured through your gateway in case that the default settings of your meter are
not what you desire.
The table above shows a decimal representation of all ags that can be set on parameter 101-103 to report specic data.
Decimal Flag Report Total HEM: Decimal Flag Report Watt for Clamps:
1 Report KWH 256 Clamp 1
2 Report Watt 512 Clamp 2
4 Report Voltage 1024 Clamp 3
8 Report Current
Decimal Flag Report KWH for Clamps: Decimal Flag Report Voltage (V) for Clamps:
2048 Clamp 1 65536 Clamp 1
4096 Clamp 2 131072 Clamp 2
8192 Clamp 3 262144 Clamp 3
Decimal Flag Report Current (A) for
Clamps:
524288 Clamp 1
1048576 Clamp 2
2097152 Clamp 3
Model number: ZW095
Input: 120V~, 60Hz, 10mA (USA version, 2P)
230V~, 50Hz, 10mA (EU/AU version, 1P/3P4)
380V~, 50Hz, 18mA (EU/AU version, 3P3)
Measure range of voltage:
80V~ to 150V~ (USA version, 2P)
180V~ to 260V~ (EU/AU version, 1P/3P4)
220V~ to 400V~ (EU/AU version, 3P3)
Measure range of current: 0A to 200A.
Operating distance: Up to 300 feet/100 metres outdoors.
Operating temperature: -10 to 50 .
Relative humidity: 8% to 80%.
Example use of the Report Table.
For example, if you want to report only the total KWH consumption, and the Wattage for clamp 3, you would add 1 + 1024
and set the sum (1025) to parameter 101, 102, or 103.
As another example, if you want to report Wattage and KWH power consumptions for all clamps, you would add 256 + 512
+ 1024 + 2048 + 4096 + 8192, then set the sum (16128) to parameter 101, 102, or 103.
And if you want to report everything, you would add the whole table together and set it to 101, 102, or 103.
Setting an automatic report interval.
Parameter 111-113 [4 byte dec] can be congured through your gateway in case the default settings of your HEM is not
what you desire.
Parameter 111 will set the interval for Group 1 (parameter 101), parameter 112 will set the interval for Group 2 (parameter
102), and parameter 113 will set the interval for Group 3 (parameter 103).
As an example, you have set parameter 101 to report the total KWH consumption and the wattage for clamp 3, and you
want to report it every 500 seconds. Set parameter 111 to 500 to accomplish this.
Utilising different groups.
Your Home Energy Meter has 3 different groups that you may setup, from the settings and examples above, you may
congure each group to report different clamps and total reports to report at different interval. Group 1 uses Parameter 101
and 111, group 2 uses parameter 102 and 112, and group 3 uses parameter 103 and 113.
Technical specications.
C C
Warranty.
6
Aeon Labs warrants to the original purchaser of Products that for the Warranty Period (as dened below), the Products will
be free from material defects in materials and workmanship. The foregoing warranty is subject to the proper installation,
operation and maintenance of the Products in accordance with installation instructions and the operating manual supplied
to Customer. Warranty claims must be made by Customer in writing within thirty (30) days of the manifestation of a
problem. Aeon Labs' sole obligation under the foregoing warranty is, at Aeon Labs' option, to repair, replace or correct
any such defect that was present at the time of delivery, or to remove the Products and to refund the purchase price to
Customer.
The "Warranty Period" begins on the date the Products is delivered and continues for 12 months.
Any repairs under this warranty must be conducted by an authorized Aeon Labs service representative and under Aeon
Labs' RMA policy. Any repairs conducted by unauthorized persons shall void this warranty.
Excluded from the warranty are problems due to accidents, acts of God, civil or military authority, civil disturbance, war,
strikes, fires, other catastrophes, misuse, misapplication, storage damage, negligence, electrical power problems, or
modication to the Products or its components.
Aeon Labs does not authorize any person or party to assume or create for it any other obligation or liability in connection
with the Products except as set forth herein.
Aeon Labs will pass on to Customer all manufacturers’ Material warranties to the extent that they are transferable, but will
not independently warrant any Material.
Customer must prepay shipping and transportation charges for returned Products, and insure the shipment or accept the
risk of loss or damage during such shipment and transportation. Aeon Labs will ship the repaired or replacement products
to Customer freight prepaid.
Customer shall indemnify, defend, and hold Aeon Labs and Aeon Labs' affiliates, shareholders, directors, officers,
employees, contractors, agents and other representatives harmless from all demands, claims, actions, causes of action,
proceedings, suits, assessments, losses, damages, liabilities, settlements, judgments, nes, penalties, interest, costs and
expenses (including fees and disbursements of counsel) of every kind (i) based upon personal injury or death or injury to
property to the extent any of the foregoing is proximately caused either by a defective product (including strict liability in
tort) or by the negligent or willful acts or omissions of Customer or its ofcers, employees, subcontractors or agents, and/
or (ii) arising from or relating to any actual or alleged infringement or misappropriation of any patent, trademark, mask
work, copyright, trade secret or any actual or alleged violation of any other intellectual property rights arising from or in
connection with the products, except to the extent that such infringement exists as a result of Aeon Labs' manufacturing
processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, OR USE INCURRED BY CUSTOMER OR ANY THIRD PARTY,
WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR OTHERWISE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. AEON LABS' LIABILITY AND CUSTOMER'S EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION ARISING IN
CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF THE PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY, BREACH OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS EXPRESSLY
LIMITED TO, AT AEON LABS' OPTION, REPLACEMENT OF, OR REPAYMENT OF THE PURCHASE PRICE FOR THAT PORTION
OF PRODUCTS WITH RESPECT TO WHICH DAMAGES ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE IN WRITING
WITHIN THIRTY (30) DAYS FROM AEON LABS'S DELIVERY, OR THE DATE FIXED FOR DELIVERY IN THE EVENT OF
NONDELIVERY.
THE INDEMNITY AND WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER INDEMNITIES OR WARRANTIES,
WHETHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
FCC NOTICE (for USA)
Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This
device must accept any interference received, including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR DRY LOCATIONS. DO NOT IMMERSE IN WATER. NOT FOR USE
WHERE DIRECTLY EXPOSED TO WATER.
1
2
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the collection systems available.
C
ertications (regional):
Z-Wave and Z-Wave Plus are registered trademarks of Sigma Designs and its subsidiaries in the United States
and other countries
This product has been tested to the requirements of CAN/CSA-C22.2 No.61010-
1, second edition, including Amendment 1, or a later version of the same standard
incorporating the same level of testing requirements.
Double insulation
Caution, risk of danger
CONFORMS TO UL STD 61010-1, CERFIFIED TO CSA STD C22.2 NO.61010-1, IEC61010-
2-032
Version:501005400001-AA www.aeotec.com
-A