Technical data

Value Description

0 Power (Default)

1 Voltage

Blinking Behavior (Parameter Number 2, Parameter Size 2) This is a double byte value. The LSB defines the total

time the device need to blink. The value if set in seconds. The MSB defines the on/off interval of the blinking. The unit is 0.1 s.

Value Description

0 — 65535 Configuration Bytes (Default 0)

Notification on Status Change (Parameter Number 80, Parameter Size 1) Defines the automated status

notification of an associated device when status changes

Value Description

0 Deactivated (Default)

1 Hail sent

2 BASIC Report Sent

Disables Function of automated sending of a Report triggered by minimal change of value.

(Parameter Number 90, Parameter Size 1)

Value Description

0 Disabled (Default)

1 Enabled

Minimum Change to send Report (Watt) (Parameter Number 91, Parameter Size 2) The value represents

the minimum change in Wattage for a Report to be sent .

Value Description

0 — 32000 W (Default 50)

Minimum Change to send Report (%) (Parameter Number 92, Parameter Size 1) The value represents the

minimum change in Watage Percent for a report to be sent

Value Description

0 — 255 % (Default 10)

Report type send in Reporting Group 1 (Parameter Number 101, Parameter Size 4) Defines the type of