User Manual

If you want to detect whether or not there would be water leakage from the fridge, you can put
the Water Senor near to the fridge. Just note that the Water Sensor cannot be put inside the
fridge or other metal container, since the metal container will affect the signal strength of the
Sensor unit and your main controller.
[Heading 2]Some conditions of the water can be detected by the Sensor.[/Heading 2]
The Water Sensor 6 will be triggered when the water leak happens in below situations:
1. Water is detected by the Sensor’s probe 2 and 4
2. Water is detected by the Sensor’s probe 1 and 3
3. Water is detected by the Sensor’s probe 1 and 2