User Manual

Touch

panel

Live

Neutral

COM

OUT S1

Note: The “N” terminal should be connected to the

“L” terminal when the Nano Dimmer is installed by

2-Wire system.

You may need to connect a small power load (E.g.

a LED light or a compact fluorescent lamp) to be

controlled. In this case, the Nano Dimmer may not

get enough power from the AC power supply, so a

damage, negligence, electrical power problems, or

modication to the Products or its components.

Aeon Labs does not authorize any person or party

to assume or create for it any other obligation or

liability in connection with the Products except as

set forth herein. Aeon Labs will pass on to Company

all manufacturers’ Material warranties to the extent

that they are transferable, but will not independently

warrant any Material. Company will assist Customer

with all warranty, repair, return and technical support

needs, Company must prepay shipping and

transportation charges for returned Products, and

insure the shipment or accept the risk of loss or

damage during such shipment and transportation.

Aeon Labs will ship the repaired or replacement

products to Company freight prepaid.Customer

and Company shall indemnify, defend, and hold

Aeon Labs and Aeon Labs' afliates, shareholders,

directors, officers, employees, contractors,

agents and other representatives harmless from