User Manual
Aeotec by Aeon Labs Nano Dimmer.
Aeotec Nano Dimmer is a Z-Wave smart dimmer
device specically used to enable Z-Wave command
and control (on/off/dim) of any in-wall switches.
It can report immediate wattage consumption or
kWh energy usage over a period of time. In the
event of power failure, non-volatile memory retains
all programmed information relating to the unit’s
operating status.
It can connect to 2 external manual switches to
control the load ON/OFF independently. Its surface
has a pin socket, which can be used for connecting
to the touch panel, so you can also use the touch
panel to control the Nano Dimmer.
The Nano Dimmer is also a security Z-Wave plus
device and supports Over The Air (OTA) feature for
the products rmware upgrade.
1
32
1
Z-Wave and Z-Wave Plus are
registered trademarks of Sigma
Designs and its subsidiaries in the
United States and other countries
FCC ID: XBAFT111
Certications (regional):
Version: 501011100001-AA www.aeotec.com
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information
regarding the collection systems available.
Warning