User Manual

13
box, away from all other wiring.
Reinstall the Nano Dimmer to the gang box.
Reinstall the cover onto the gang box.
(3-Wire system)
(2-Wire system)
c.
d.
20
1
1
2
2
3
3
L
N
L
N
Monitoring Energy Consumption.
The Aeotec Nano Dimmer can report wattage
energy usage or kWh energy usage to a Z-Wave
control point when requested. If this function
is supported by the control points, the energy
consumption will be displayed in the user interface
of the control points. (The specific Z-Wave
commands supporting energy monitoring are the
Meter Command Class. Automatic reports are
sent to association group 1, which is setup via the
Association Command Class.) Please consult the
panel. When you have already connected it to the
Nano Dimmer, you will be possible to control the
Nano Dimmer through the Touch panel directly.