User Manual

The below diagram will show you that the Nano
Dimmer uses the SPDT (Single-Pole Double-Throw)
switches as the external manual switch.
Since the S1 port and S2 port can be used to
control the load separately, you can choose to
connect the SPDT switches to the S1 or S2.
10
23
Wiring diagram of SPDT as the external manual
switch.
Warranty.
7
If you are in need of any technical support during or
Touch panel
Live
3-Way Switch (SPDT)
3-Way Switch (SPDT)
Neutral
L N
COM
OUT S1 S2
Model number: FT1
11-A/ZW111-A
Power input: AC 120V, 60Hz. Rated output: Max
1.2A.
Max standby power: <0.8W.
Power measurement accuracy: ±3W.
Operating temperature: 0
℃
to 40
℃
/32
℉
to 104
℉
.
Relative humidity: 8% to 80%.
Operating distance: Up to 492 feet/150 meters
outdoors.
Supported Loads:
Control ability Supported load types
With dimming
function (On/Off/
Dim control)
Incandescent bulbs, halogen bulbs
with or without electronic transformer,
dimmable LED bulbs, dimmable
compact uorescent lamps.
Without dimming
function (On/Off
control)
Non-dimmable bulbs (Compact
uorescent lamps with electronic
rectier, uorescent tube lamps with
electronic ballast, LED bulbs).