User's Manual
If you’re using a Minimote:
If your Z-Stick is plugged into a gateway or a computer, unplug it.
Take your Z-Stick to your MultiSensor.
Press and hold the Action Button on your Z-Stick for 3 seconds
and then release.
Press the Action Button on your MultiSensor.
If your MultiSensor has been successfully removed from your
network, its LED will blink when you press the Action Button on
the MultiSensor. If the removal was unsuccessful, the LED will
stay solid for a few seconds when you press the Action Button.
Press the Action Button on the Z-Stick to take it out of removal
mode.
Take your Minimote to your MultiSensor.
Press the Remove Button on your Minimote.
1.
2.
3.
4.
5.
6.
1.
2.
12
Remove
9
Tips: We suggest you choose the second method (using screws to
afx the Back-Mount Arm) would be more stable.
Attach your desired mounting accessory. This can be the Back-
Mount Arm. You can affix the Back-Mount Arm via using the
provided KA2.5×20mm screws or Double-Sided Tape.
After you have completed the afxing of Back-Mount Arm, you
will need to lock the MultiSensor to the Back-Mount Arm via
turning the MultiSensor.
3.
4.
USB port
Battery Holder
Or
Double-Sided Tape