Instruction Manual

• Shifting the Primary/Master Controller Role to Another Controller in the Same Network
1. In Press the button labeled “Learn” on the other Z-Wave controller to become
primary/master - The blue LED will blink to indicate the Z-Wave controller is ready
to receive information from another Z-Wave controller.
Consult the operation manual of other controllers for instructions on how to receive
new information from the primary controller in the Z-Wave network to become the
new primary/master controller of the network.
2. Press and hold both the buttons labeled “Include” and “Remove” on the Minimote
for 10 seconds – The blue and red LEDs will blink from slow to fast.
3. The blue LEDs will stay solid for 2 seconds to indicate success.
• Upgrading the Minimote with the Latest Sofware
1. Download the Aeon Labs Minimote upgrade software at http://www.aeon-labs.com
and run the downloaded program.
2. Follow the on screen instructions to complete installation.