User Manual

5
1.3. SPARE PARTS
One USB mains adapter and one USB A / micro USB cord 1.80m long.
One set of 5 connecting strips with 6 screw terminals.
One set of two 1.2V, 2400mA NiMH batteries.
For accessories and spares, visit our web site:
www.chauvin-arnoux.com
1.4. BATTERY CHARGING
 Turn the instrument over.
 Remove the battery compartment cover by pushing it as far as the marks in the direction indicated by the arrows, then lifting it off.
 Insert the 2 batteries provided, paying attention to the polarity.
Figure 3
 Put the battery compartment cover back on and push it closed.
 Connect the micro USB cord to the instrument, then the USB part to the mains adapter.
> 90 VAC
< 264 VAC
50 / 60 Hz
Figure 4
 If the batteries are fully discharged, charging takes approximately 5 hours.