User Manual

4
1. FIRST USE
1.1. DELIVERY CONDITION
Figure 1
1
One L452 Data Logger.
2
Two 1.2V, 2400mA NiMH batteries.
3
One USB A / micro USB cord 1.80m long.
4
One USB mains adapter.
5
One connecting strip with 6 screw terminals.
6
One CD containing the user manual (1 le per language) and Data Logger Transfer software.
7
One multilingual getting started guide.
8
One certicate of verication.
1.2. ACCESSORIES
One wall mount
190, rue Ch
ampionnet
75876 PARIS Cedex 18
ATTESTATION DE VERIFICATION
CHECKING ATTESTATION
Numéro de l'appareil :
Nous certifions que ce produit a été fabriqué conformément aux spécifications
techniques de constuction applicables.
We certify that this product is manufactured in accordance with applicable
constructing specifications.
907 009 119 - 02/03
FRANCE
Equipment number
Établi en usine, ce document atteste que le produit ci-dessus a été vérifié et est conforme aux
conditions d'acceptation définies dans nos procédures de fabrication et de contrôle.
Tous les moyens de mesure et d'essai utilisés pourrifier cet appareil sont raccordés aux
étalons nationaux et internationaux soit par l'intermédiaire d'un de nos laboratoires de métrologie
accrédités COFRAC soit par un autre laboratoire accrédité.
Après sa mise en service, cet instrument doit être vérifié à intervalle régulier
auprès d'un service de métrologie agréé.
Pour tout renseignement veuillez contacter notre service après vente et d'étalonnage.
At the time of manufacture, this document certifies that the above product have been verified and
complies with acceptance conditions defined in our manufacturing and testing procedures.
Every test or measuring equipment used to verify this instrument are related to national
and international standards through one of our laboratories of metrolo
gy certified by french COFRAC
equivalent to NAMAS in the UK or through another certified laboratory.
After being in use, this instrument must be recalibrated within regular intervals
by an approved metrology laboratory. Please contact our after sales and calibration department:
Service après vente et d'étalonnage TEL: +33 (2) 31 64 51 55 FAX: +33 (2) 31 64 51 72
After sales and calibration department e-mail: info@manumesure.fr
WEB : www.manumesure.com
www.chauvin-arnoux.com
Vérifié par :
Tested by
ATTESTATION DE CONFORMITE
COMPLIANCE ATTESTATION
Type /
Model
:
Désignation de l'instrument :
Instrument designation
Signature :
Signature
V
INPUT 1
INPUT 2
VmA mA
30V
MAX
L452
SIMPLE LOGGER III
This is attached to the wall, and makes
it possible to protect the instrument
against theft by padlocking it.
Figure 2