User Manual
22
Figure 17
For more security, then make the instrument invisible on the Bluetooth network (see §3.4). It will then not appear in the lists of
available peripherals on other computers within its range.
5.5. REMOTE MODE
The L452 can operate in 2 modes:
The local mode (see §§3 and 4), which can be used to congure the instrument, congure the measurements, display the meas-
urements, start and stop recording, and clear the memory.
The remote mode is used to control the instrument from a PC. In addition to everything you can do in the local mode, the remote
mode lets you assign a name to the location of the instrument and name the recordings, and to upload the records for subsequent
processing. The measurements are then displayed directly on the PC.
The remote mode can be automatic (the instrument connects to the PC as soon as it is switched on) or manual.
When the instrument is in the remote mode, the
symbol is displayed on the screen.
The conguration of the instrument can be locked from the PC. This makes it impossible to change it in the local mode, even if the
instrument is disconnected from the PC.
If you have no way of unlocking the conguration from a PC, you can switch the instrument off. Effect a long press on the On/Off
key. The instrument displays Remote Mode. Keep pressing and the instrument will end by switching off. When you switch it
back on, it will be in the local mode.