User Manual

20
5. DATA LOGGER TRANSFER SOFTWARE
5.1. FUNCTIONS
The Data Logger Transfer software is used to:
 Connect the instrument to the PC, using either USB or Bluetooth.
 Congure the instrument: choose the language, set the date and time, activate or deactivate the Bluetooth link (the latter only
if connected by USB), activate or deactivate visibility of the instrument on the Bluetooth network and give it a name, etc.
 Congure the measurement channels.
 Congure the records: choose their names, their duration, their start and end dates.
 Start and stop recording.
Data Logger Transfer is also used to upload recorded sessions to a PC to save them, display them, or analyse them. And nally
to export them to a spreadsheet and view the corresponding curves.
5.2. INSTALLATION
Do not connect the instrument to the PC until the software and driver have been installed.
 Insert the CD in the CD-ROM drive.
Figure 12
If automatic execution is activated, the program starts automatically.
If not, select Setup.exe
 Then follow the instructions to install the program.
To use the Data Logger Transfer software, refer to its help function.
5.3. USB CONNECTION
 Once the software and the driver have been installed, you can connect the instrument to the PC.
Figure 13
V
INPUT 1
INPUT 2
VmA mA
30V
MAX
L452
SIMPLE LOGGER III