User Manual

11
 Switch the instrument on, press  four times and  twice.
CONFIGURATION:
NO ACTION
 Press

twice, then the  or  key to display RESET, and
nally

to validate.
The instrument asks for conrmation.
RESET CONFIG?
PRESS ENTER
TO CONFIRM
 To cancel, press  and  simultaneously. To conrm, press  .
3.5. RESTORING THE ORIGINAL CONFIGURATION
You can cancel all of the changes you have made to the conguration by resetting the instrument.
Only the date, the time, and the content of the memory will remain.
3.6. DISPLAY OF PRODUCT INFORMATION
The information in this menu can be looked up but not modied.
L452
SN: 452101MLP
Firmware: 1.00
NAME:
LOCATION:
L452-452105MLP
CHAUVIN ARNOUX
 From the Measurement data screen, press  ve times. You
can see:
 The reference of the instrument (L452),
 The serial number,
 The internal software version,
 Press . You can see:
 The name of the instrument for the Bluetooth network,
 The location of the instrument. The only way to specify
this is via the Data Logger Transfer software.
 Press . You can see:
 The number of recording sessions stored in memory,
 The available memory.
RECORDING
SESSIONS: 0
FREE
MEMORY:31.88 MB