Upgrade Notes

Infinity User Manual6

4) Begin the Firmware Upgrade process.

a. Select the desired Configuration “Image” on the left.

i. If no images are present check C:\Program Files (x86)\AEM\Infinity Tuner\

and verify .pakgrp file is there. If not, visit http://www.aeminfinity.com, log in,

and download appropriate file.

b. Ensure "Keep Calibration Data" check-box is marked to save current

calibration.

c. Click the “Begin” button to start the upgrade process.

5) Follow the message at the bottom, and turn the ignition switch OFF when instructed

to do so.