Installation Manual

3
Read and understand these instructions BEFORE attempting to install this product. Failure to follow installation
instructions and not using the provided hardware may damage the intake tube, throttle body and engine. If you
need any assistance please call1-800-858-3333 to speak with a representative in our Customer Service Center
before returning the product.
1. Preparing Vehicle
a. Make sure vehicle is parked on level surface.
b. Set the parking brake.
c. If engine has run in the past two hours, let it cool down.
d. Disconnect negative battery terminal.
e. Do not discard stock components after removal of the factory system.
f. Open the air intake kit package and make sure all parts are included.
2. Removal of stock system
a. Detach the two latches securing the upper air box lid
to the lower air box lid.
b. Disconnect the intake air temperature sensor con-
nector.
c. Loosen the hose clamp at the upper air intake tube. d. Loosen the hose clamp at the lower air intake tube.
Tools Needed:
Screw driver
10MM socket
Socket Driver
Knife