Owner's manual

Page 12
Or connect the “Auxiliary Input” as shown below. See Figure 23.
FIC
0-5V OUT
UEGO
AUX IN
Figure 23: Auxiliary gauge connection
Do you want to use the F/IC’s Internal Data Logger or the Dual Calibration mode?
If so, connect the “Switch Input” as shown below in Figure 24.
FIC
SW IN
Figure 24: Switch input connection
Connect the “Boost Line” to manifold pressure (After Throttle Body) as shown
below in Figure 25.
FIC
TO MANIFOLD PRESSURE
Figure 25: Boost connection