Installation Manual

6
h. Install the supplied rubber mount into the
passenger side radiator support frame rail as shown.
When tightening the nut, tighten until the thin outer
wall of the support starts to deflect.
Bracket
i. Install the lower intake pipe behind the radiator with
the bracket sliding onto the rubber mount. Use the
washer and screw on the nylok nut but do not tighten
at this time.
j. Using the 2.75” silicone hose and two hose clamps
supplied, attach the upper and lower intake pipes
together.
k. Check the lower intake pipe clearance between the
radiator fan guard, the A/C line, and the sway bar.