Installation Manual

4
e. Remove the air filter lid from the air filter hous-
ing. Unclasp the four retaining clasps. Also be
sure to disconnect the crank case breather hose
from the lid.
f. This is the intake tube and air filter lid after
removal from the vehicle.
g. Remove the three bolts securing the bottom half
of the air box to the vehicle.
h. The factory air box housing removed.
i. Remove the four bolts securing the throttle body
to the intake manifold. After removal of the four
bolts, place the throttle body spacer between the
throttle body and the intake manifold. Install with
the supplied gaskets and bolts, refer to the
diagram on page 2 for the gasket placement.
j. 2000-2006 Vehicles: Remove the 2 bolts on the
throttle body linkage and replace with the supplied
bolts and spacers.
1997-1999 Vehicles: Locate the 3 bolts attaching
the throttle body linkage and replace with the 3
supplied bolts and spacers.