Installation Manual

7
i. On vehicles equipped with an IAT sensor,
install the provided adapter plate onto the
intake pipe using the two supplied bots. Install
the supplied grommet into the plate. Install the
IAT sensor into the grommet on the adapter
plate and proceed to step 3j.).
h. Vehicle with a MAF Sensor: Install the sensor
into the intake pipe using the two factory bolts
removed during step 2i. Proceed to step 3k.).
j. Install the air filter status meter into the rubber
grommet on the rear of the pipe.
NOTE: If the air filter status meter wire is in
tension proceed to Step 4.
k. Plug in the MAF sensor.