Installation Manual

3
Read and understand these instructions BEFORE attempting to install this product.
Failure to follow installation instructions and not using the provided hardware may
damage the intake tube, throttle body and engine.
1. Preparing Vehicle
a. Make sure vehicle is parked on level surface.
b. Set parking brake.
c. If engine has run in the past two hours, let it cool down.
d. Disconnect negative battery terminal.
e. Do not discard stock components after removal of the factory system.
2. Removal of stock system
a. Stock air box configuration system.
b. Release the four clips on the air box.
c. Loosen the hose clamp on the turbo inlet pipe.
d. Vehicle equipped with MAF sensor. Unplug the
mass air flow (MAF) sensor.