Installation Manual

7
l. Using two flat head screwdrivers, carefully pry
up on the lip of the washer level sensor, using
care not to damage the rubber grommet. A soapy
water mixture may be used to aid with the sensor
removal. Also, remove the grommet and set aside
in a safe area.
m. Insert the stock washer pump grommet into the
inlet on the front of the supplied washer bottle.
n. Apply some liquid soap solution to the washer
pump and insert it into the grommet. Firmly press
the pump all the way into the grommet.
o. Install the level sensor grommet into the sup-
plied washer bottle as shown.