Installation Manual

h. Insert the two white connectors into the rubber

inlet hose.

NOTE: Using glass cleaner to lubricate the

parts will help with installation.

i. Install the air bypass valve into the rubber inlet

hose and secure with the OE hose clamp.

j. Insert the two aluminum connectors into each

of the 5/16” hoses. Connect the 5/16” hose to the

white connectors attached to the rubber inlet as

shown.

k. Install the MAF sensor to the intake pipe and

secure with the supplied socket bolts.

l. Install the rubber inlet into the vehicle, position-

ing the air bypass valve toward the top of the

engine. Loosely secure the inlet to the turbo inlet

with a hose clamp (9444).

m. Install the PCV hose into the rubber inlet hose.