Installation Manual

e. Loosen the hose clamp securing the rubber

inlet tube to the stock air box assembly.

f. Remove the air bypass valve hose from the OE

inlet by pulling it toward the passenger side of the

vehicle.

g. Remove the two plastic rivets securing the air

inlet duct.

h. Disconnect the OE inlet tube from the air box,

then remove the air box from the engine bay by

pulling straight up.

i. Disconnect the air bypass valve hose from the

air bypass valve.

j. Use pliers to compress the hose clamp securing

the vacuum line to the air bypass valve and slide it

away from the air bypass valve.