Troubleshooting guide

Please read this instruction manual carefully prior to installation Page 07
DX2000-LCD - DigiSender® Plug’n’Go™ LCD
Step 4: Using the DigiSender® Plug’n’Go™ LCD
Switch on the source equipment (Satellite, Cable,
Freeview, DVD, VCR, etc.).
1.
On the receiving TV, select the SCART channel
assigned to the SCART socket that you plugged
the DX2000-LCD Receiver in to. This may be la-
belled as SCART, AUX, AV, VIDEO, VCR or .
2.
When controlling your Satellite, Cable or Free-
view box, point the remote control at the IR Sen-
sor in the receiving location. Ensure you are using
the correct remote control for the source device.
3.