Troubleshooting guide

Page 11Please read the instructions carefully prior to installation
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System
WRONG TV CHANNEL
SELECTED
This indicates that the cor-
rect SCART Channel has NOT
been selected on the second
television. Look for buttons
on this televisions remote
control which could select the
AV Channel such as EXT, AV,
VIDEO, VCR, AUX, Channel 0
AND .
INTERFERENCE
This indicates one or more
electrical devices are inter-
fering with the DigiSender®.
Make sure the Transmitter
and Receiver are not directly
on top of other electrical de-
vices. Try all 4 Audio/Video
Channels on your DigiSender®
as one or more may still be
available. Visit digisender.net
or contact our helpline for in-
formation on configuring your
equipment to work together.
NOT RECEIVING SIGNAL
1. Switch the DigiSender® Re-
ceiver back on.
2. Ensure the DigiSender®
Transmitter is switched on.
3. Try the other 3 available Au-
dio/Video channels ensuring
that the Audio/Video Channel
is set the same on both the
Transmitter and Receiver.
I now see a black screen...
I still see a snowstorm or
blue screen...
Switch OFF your DigiSender® RECEIVER.
What do you now see on the second TV?
I see a snowstorm or blue
screen...
I see lines over the picture...
What do you see on the second TV?
Troubleshooting
Video Problems