Troubleshooting guide

Page 10 Please read the instructions carefully prior to installation
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System
Troubleshooting
Video Problems
RECEIVING BLANK SIGNAL
1. Switch the Transmitter on.
2. Ensure the Transmitter is
connected to your source de-
vice (such as your Satellite,
Cable, Freeview, DVD or VCR).
3. Ensure that your source de-
vice is switched on.
POOR RANGE
1. The picture & sound quality
is affected by the Transmitter
and Receiver’s location. Try
positioning them in different
locations. The Transmitter and
Receiver should be connected
to a mains extension lead that
can be moved.
2. Try the other 3 available Au-
dio/Video channels ensuring
that the Audio/Video Channel
setting is the same on both
the Transmitter and Receiver.
3. Ensure the units are within
the usable range, normally
this would be 40m when pass-
ing through 2 average internal
walls. Thicker or stone/granite
walls may lower the usable
range of this device.
WRONG AV CHANNEL
SELECTED
1. Switch the Transmitter back
on.
2. Ensure the correct SCART
channel is selected on your
second television. Some
televisions feature multiple
AV channels for one or more
SCART, phono and S-Video
inputs.
3. If available try another
SCART socket on the second
television.
I still see a black screen...
I now see a snowstorm or
blue screen...
Switch OFF your DigiSender® TRANSMITTER.
What do you now see on the second TV?
The picture is present but
poor quality...
I see a black screen...
What do you see on the second TV?