Model: DX2000-LCD Plug’n’Go™ LCD Single Input 5.8GHz Wireless AV Sender System ? er! om iv ro ece n 1 al R n ha e t tio ils or Addi deta or om t t RX u f mi CD i.e ns -L ae ra 00 w. ot 2 w tt X w an a D it: W ed Vis ne u Yo WATCH A VIDEO INSTALLATION & & TROUBLESHOOTING TROUBLESHOOTING GUIDE GUIDE Available Available online online at: at: www.aei.eu/video www.aei.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Introduction Congratulations on purchasing the DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System. This product represents state of the art wireless audio and video technology at exceptional value for money. You can now enjoy DVD quality video and Hi-Fi stereo sound from your Satellite, Cable, Freeview, DVD or VCR in another room in your home.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Installing your DigiSender® Step 1 - Unpack your DigiSender® All DigiSender® orders are computer weight checked when packed. However, it is a good idea to check all kit contents are present before proceeding with the installation. 1. 3. 4. 6. 2. 5. DX2000-LCD Transmitter DX2000-LCD Receiver 1. Transmitter Unit 2. Pre-wired IR Emitter 3. Pre-wired DigiConnector™ SCART Input 4. Receiver Unit 5.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Installing your DigiSender® Step 2 - Install the Transmitter The Transmitter will send the audio and video from a connected source (your Satellite receiver for example) to the Receiver, located in another room in your home. 4. 1. 2. Connect the DigiConnector™ to your Satellite, Obis aut et pe nisin pre nonectius ipis ipicit eum Cable or Freeview box.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Installing your DigiSender® Step 3 - Install the Receiver The Receiver will pick up the signals being sent by your Transmitter and output them to a connected TV. 1. 2. Locate a vacant SCART socket on the back of your receiving TV and insert the DigiSender® SCART cable. Connect the Receiver to a mains socket. Again, you might want to consider plugging the Receiver into a mains extension lead. 3. 4.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Using your DigiSender® Standard Operation The steps below should be followed every time you use the DigiSender®. 1. 2. Switch on the source equipment (Satellite, Freeview, DVD, VCR, etc.). If you have not already done so, turn on both the Transmitter and Receiver by pressing the power button on the front of the units. 3. 4.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Using your DigiSender® Advanced Functions Changing the Audio/Video Channel The DigiSender® Plug’n’Go™ LCD features 4 Audio/Video Channels. Each of these Audio/Video Channels slightly changes the frequency on which the DigiSender® Plug’n’Go™ LCD operates.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Troubleshooting Audio Problems Q: What seems to be the problem with the sound? I can see the picture but can’t hear anything. 1. Disconnect both the Transmitter AND Receiver SCART cables. Reconnect the cables ensuring they are pushed into the sockets firmly. 2. If you are using a home cinema DVD player with surround sound, please ensure the analogue audio output on SCART is switched on. The sound is distorted.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Troubleshooting Video Problems What do you see on the second TV? The picture is present but poor quality... POOR RANGE 1. The picture & sound quality is affected by the Transmitter and Receiver’s location. Try positioning them in different locations. The Transmitter and Receiver should be connected to a mains extension lead that can be moved. 2.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Troubleshooting What do you see on the second TV? I see a snowstorm or blue screen... Switch OFF your DigiSender® RECEIVER. What do you now see on the second TV? I now see a black screen... NOT RECEIVING SIGNAL 1. Switch the DigiSender® Receiver back on. 2. Ensure the DigiSender® Transmitter is switched on. 3.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Troubleshooting Remote Relay Problems If you have any difficulty operating your source equipment remote control in your second room please follow the advice below below: 1. Ensure the IR Emitter is connected to the socket labelled ‘IR’ on the Transmitter. 2. Ensure you are using the correct remote control in the second room.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.8GHz Wireless AV Sender System Troubleshooting Technical Support & Accessories Technical Support AEI Security & Communications Ltd is dedicated to providing our customers with first class customer care and technical support. 1. Website Free technical advice is available online 24/7 at our dedicated support web site: www.aei.eu 2. Online Videos Watch online Installation and Troubleshooting Video Guides at: www.aei.eu/video 3.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD - Single Input 5.
D E CL AR AT I O N O F CO NF O R MI T Y 01022007/01/DG-DV-DX We, AEI Security & Communications Ltd. Weslake Industrial Park, Harbour Road, Rye, East Sussex, TN31 7TE, United Kingdom declare under our sole responsibility that the products bearing the series code prefixed: DGx, DVx, DXx (x refers to the specific model number) are in conformity with the essential requirements of Directive 1995/5/EC.
SPECIFICATIONS Transmitter Inputs 1x DigiConnector™ SCART Receiver Outputs 1x SCART Audio/Video Frequency 5.725GHz ~ 5.
