Specifications

Page 10
Online Support at www.digisender.net
DG440 DigiSender™ X7
STEP 4
Install the DigiSender™ X7 Receiver Unit
The DigiSender™ X7 Receiver will pick up transmitted signals from the transmitter
unit and output them to a television. In addition, the receiver detects remote
controls being used in the second room and will send those signals to the source
equipment in your main lounge.
STEP 1
STEP 2
STEP 3
Connect the SCART output to the second
television.
Place the DigiSender™ receiver on a flat surface
near to your second television. Avoid placing the
receiver directly on top of other electrical devices
such as the television.
Ensure that both the A/V Channel and IR Channel
are set to 1.
See the trouble shooting sections for further
information on the channel selection process.
No SCART socket on the TV??
AEI produce an ‘Aerial
Convertor ‘ enabling
you to connect
the receiver to
any TV without a
SCART socket.
Ask for part
number
MOD01PIS
BEDROOM
BEDROOM
BEDROOM
Page 15
Please read this instruction manual carefully prior to installation
DG440 DigiSender™ X7
cont...
I see a snowstorm effect or
plain blue screen
Switch OFF your DigiSender® RECEIVER.
Q: What do you now see at the second TV?
I see lines over the picture
NOT RECEIVING
SIGNAL
1. Switch the DigiSender®
Receiver back on
2. Ensure the DigiSender®
Transmitter is switched on
3. Select a different audio/video
channel ensuring an identical
channel is chosen on both the
transmitter and receiver
4. Switch off any wireless
cameras and/or networks in your
household.
I now see a Black screen
WRONG TV
CHANNEL SELECTED
This indicates the SCART
Channel has NOT been selected
on the second television. Look
for buttons on this televisions
remote control which could
select the AV Channel such as
EXT, AV, VIDEO, VCR, AUX,
Channel 0 AND .
I still see a snowstorm or
blue picture
INTERFERENCE
This indicates one or more
electrical devices are interfering
with the DigiSender®. To
ascertain the source of the
interference, switch OFF any
wireless networking equipment,
laptops, 2.4GHz DECT phones,
games consoles or bluetooth
devices. Try all 4 audio/video
channels as one or more may
still be available. Visit
digisender.net or contact our
helpline for information on
configuring your equipment to
work together.