Instruction manual

Page 15
Please read this instruction manual carefully prior to installation
DG440 - DigiSender® X7
ENGLISH
continued...
Black Screen
Still Snowstorm or Blue...
1. Switch the DigiSender® Receiver back on
2. Ensure the DigiSender® Transmitter is switched on
3. Select a different audio/video channel ensuring an identical
channel is chosen on both the transmitter and receiver
4. Switch off any wireless cameras and/or networks in your
household.
This indicates the SCART Channel has NOT been selected on
the second television. Look for buttons on this televisions
remote control which could select the AV Channel such as
EXT, AV, VIDEO, VCR, AUX, Channel 0 AND .
Still a Black Screen...
1. Switch the transmitter back on.
2. Ensure the transmitter is connected to your source device -
not your main television.
3. Ensure that the source equipment is switched on (such as
your satellite, cable or freeview box)
4. Ensure the source device (such as your satellite receiver or
DVD) is set to output CVPAL, PAL or COMPOSITE.
Incompatible types include S-VIDEO and RGB.
1. Switch the transmitter back on.
2. Ensure the correct SCART channel is selected on your
second television. Some televisions feature multiple channels
for one or more SCART, phono and S-Video inputs.
3. If available try another SCART socket on the remote
television
It’s now a snowstorm or blue
1. Adjust the Contrast A/B switch on the transmitter
2. Try the 3 other available channels ensuring that the audio/video channel is set to the same on both the
transmitter and receiver
3. Ensure the units are within the usable range, normally this would be 40m when passing through 2
average internal walls. Thicker or stone/granite walls may lower the usable range of this device.
4. Switch off any wireless computer network devices, 2.4GHz DECT cordless phones & microwave ovens.