Troubleshooting guide

Page 12 Please read the instructions carefully prior to installation
DGXDSDV112 - DigiSender® XDHDMI - Single Input HDMI AV Sender System
(EN) ENGLISH
Turn on both the Transmitter and the Receiver.
1.
Should you need to re-sync the Transmitter and Receiver at any point, this can be achieved by follow-
ing the instructions below.
Using your DigiSender® XDHDMI
Re-syncing the Transmitter and Receiver
Please note that because you need to hold the Pair Button on both the Transmitter and Receiver simulta-
neously, you will need to have the Transmitter and Receiver in the same room as each other and within
reach. Alternatively, if you have someone that can help, they can hold the Transmitters Pair Button in the
lounge while you hold the Receivers Pair Button in the bedroom.
Press and hold the ‘Pair’ button on the back of the
DigiSender® Transmitter and Receiver, simultane-
ously, for 5 seconds and then release.
2.