Troubleshooting guide

Page 09Please read the instructions carefully prior to installation
Using your DigiSender®
Standard Operation
The steps below should be followed every time you use the DigiSender®.
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System
Select Input 1 or 2 by pressing the Power but-
ton once for Input 1 or twice for Input 2 on the
Transmitter. The red Input LED will light to indicate
which source is active. Alternatively press the ‘Input
1’ or ‘Input 2’ button on the DigiSender® Remote Control.
3.
On the receiving TV, select the SCART channel
assigned to the SCART socket that you plugged
the DG258 Receiver in to. This may be labelled as
SCART, AUX, AV, VIDEO, VCR or .
4.
Switch on the source equipment (Satellite, Free-
view, DVD, VCR, etc.).
1.
Turn on the Transmitter and Receiver by pushing
the Power button on the front of the units. The
Power button will light up blue to indicate the unit
is switched on. Alternatively press the Power button on
the DigiSender® Remote Control.
2.