Troubleshooting guide

Connect the Power Supply Unit (PSU) to the socket
labelled ‘PSU’ on the Receiver.
3.
Connect the Power Supply Unit (PSU) to an avail-
able mains socket.
4.
Locate a vacant SCART socket on the back of your
receiving TV and insert the DigiSender® SCART
cable.
1.
Ensure that the Audio/Video and Remote Relay
Channel switches on the back of the Receiver are
set to 1.
2.
Page 08 Please read the instructions carefully prior to installation
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System
Installing your DigiSender®
Step 4 - Install the Receiver
The Receiver will pick up the signals being sent by your Transmitter and output them to a connected
TV.