Troubleshooting guide

Page 08 Please read the instructions carefully prior to installation
DG180-S - DigiSender® xSender™ - Single Input 2.4GHz Wireless AV Sender System
Using your DigiSender®
Standard Operation
The steps below should be followed every time you use the DigiSender®.
On the receiving TV, select the SCART channel as-
signed to the SCART socket that you plugged the
DG180-S Receiver in to. This may be labelled as
SCART, AUX, AV, VIDEO, VCR or .
3.
Switch on the source equipment (Satellite, Free-
view, DVD, VCR, etc.).
1.
Switch on the Transmitter and Receiver at the rear
of the units.
2.
To control your source equipment, use its original
remote control while pointing it at the front of the
receiver.
4.