Troubleshooting guide

Obis aut et pe nisin pre nonectius ipis ipicit eum
dem nos net etur modipissi alit in eumet ipsunto te
nobitatur sunt, et, sandae ratur sincimus.
4.
Obis aut et pe nisin pre nonectius ipis ipicit eum
dem nos net etur modipissi alit in eumet ipsunto te
nobitatur sunt, et, sandae ratur sincimus.
4.
Page 05Please read the instructions carefully prior to installation
Ensure that the Audio/Video Channel switch on
the back of the Transmitter is set to 1.
2.
Connect the IR Emitter to the socket labelled ‘IR’
on the back of the Transmitter.
3.
Connect the DigiConnector™ to your Satellite,
Cable or Freeview box. Use the SCART socket la-
belled ‘TV’ or ‘OUT’. Connect any existing SCART
lead into the rear of the DigiConnector™.
1.
Installing your DigiSender®
Step 2 - Install the Transmitter
The Transmitter will send the audio and video from two connected sources (your Satellite receiver
and DVD Player for example) to the Receiver, located in another room in your home.
DG180-S - DigiSender® xSender™ - Single Input 2.4GHz Wireless AV Sender System
Position the IR Emitter on or in front of your source
equipment (satellite, freeview, DVD, etc.) with the
LED facing toward the equipments IR Sensor.
4.