Troubleshooting guide

Page 13Please read the instructions carefully prior to installation
DG180-S - DigiSender® xSender™ - Single Input 2.4GHz Wireless AV Sender System
Troubleshooting
Remote Relay Problems
If you have any difficulty operating your source equipment remote control in your second room
please follow the advice below below:
1. Ensure the IR Emitter is connected to the socket labelled ‘IR’ on the Transmitter.
2. Ensure you are using the correct remote control in the second room. For instance, if you are trying
to control your Satellite box you will need to use the Satellite remote control.
3. Ensure the IR Emitter is facing the IR sensor on your source equipment.
4. Move the IR Emitter further away from the source equipment.
5. Move the Transmitter AND Receiver further away from other electrical devices.
6. Try operating your source remote control closer to the Receiver.
7. Replace the batteries in your source remote control.
WATCH A VIDEO
INSTALLATION
& TROUBLESHOOTING GUIDE
Available online at: www.aei.eu/video
WATCH A VIDEO
INSTALLATION
& TROUBLESHOOTING GUIDE
Available online at: www.aei.eu/video