Instruction manual

DG180-S - Wireless Video Sender System
Please read this instruction manual carefully prior to installationPage 08
STEP 4
Using the xSender™
To control your source equipment, use its origi-
nal remote control i.e. your Satellite remote,
Freeview remote, DVD remote, VCR remote, etc.,
while pointing it at the xSender™ Receiver.
4.
Switch on the source equipment (Satellite,
Freeview, DVD, VCR, etc.).
1.
Switch on the xSender™ Transmitter and
Receiver at the rear of the units.
2.
On the receiving TV, select the SCART channel
assigned to the SCART socket that you plugged
the DG180-S Receiver in to. This may be labelled
as SCART, AUX, AV, VIDEO, VCR or .
3.