Instruction manual

DG180-S - Wireless Video Sender System
Please read this instruction manual carefully prior to installationPage 06
continued...
Connect the Power Supply Unit (PSU) to the sock-
et labelled ‘PSU’ on the DG180-S Transmitter.
5.
Connect the Power Supply Unit (PSU) to an avail-
able mains socket.
6.
What’s the A/B switch for??
The Contrast (A/B) switch is present to compen-
sate for differences in equipment set-ups.
Once installation is
complete, if you
experience a poor
picture try
adjusting the
A/B setting.
Important Note: Avoid positioning the DG180-S Transmitter near to other wireless devices operating on
2.4GHz. These can include Wireless Routers, Laptops, Games Consoles, DECT Phones or Bluetooth devices.