Instruction manual

Page 5
DG180-S xSender™
IMPORTANT
Changing the Audio/Video
(2.4GHz) Channel
This section only applies if you are using
more than 1 transmitter (for example,
CCTV use) or a neighbour is also using a
wireless video sender.
There are 4 channels available for use in
the 2.4GHz band. Your transmitter and
receiver MUST be set to the same
channel in order to operate.
This setting is made on the rear of
the units, look for the switch labelled
‘Audio/Video Channel
’
PLEASE PROCEED TO PAGE 6 TO PROCEED WITH
INSTALLATION OF THIS PRODUCT.