Instruction manual

Page 13
DG180-S xSender™
STEP 2
Connect the power supply unit as show
below.Then, switch ON the xSender™
receiver and your television.
IMPORTANT: Always switch off
your mains supply at the socket,
prior to connecting the power
supply units
STEP 3
You must select your televisions A/V
channel in order to view your remote
equipment (satellite/cable television etc.)
This is done on your televisions remote
control unit. We have made a list below of
some of the more common buttons you
need to press to activate the A/V channel.
Please refer to your televisions user guide
for details on connecting external video
sources.
Press...
A/V
VIDEO
TV/VCR
VCR
EXT
LINE
Please note, you do not need to tune your
TV into the DG180-S, and your TV does
not need an aerial connection.
Figure 13.1 Connect
PSU to Receiver
Figure 13.2:
Connect PSU to
240V mains outlet