Instruction manual

Page 10
http://www.aei.info
Finishing the transmitter
installation
You’ve almost finished installing the
transmitter!
The xSender™ features an internal remote
control extender. This enables you to use
your original equipment remote controls
in the remote location.
The ‘magic eye’ emits your original remote
control signals and must be positioned
correctly in order to work well.
NTL® and Telewest® customers may
require the DigiEye™ upgrade. See FAQ
for details.
STEP 1
Connect one of the supplied PSU’s
(power supply unit) to your xSender™
transmitter. The plug section must then be
connected to an available mains socket.
IMPORTANT: Always switch off
your mains supply at the socket,
prior to connecting the power
supply units
Figure 10.1
Connect PSU to 240V
mains outlet
Figure 10.2
Connect PSU to
Transmitter