Instruction manual

DIGITAL WIRELESS CAMERA MONITORING SYSTEM - CTVM300LCDDM
Please read this instruction manual carefully prior to setting up
Page 09
continued...
Adjusting the Menu Settings
1 - Press the Menu button to toggle through the various menu selections.
2 - Press the Select button to toggle through and select a setting.
3 - Use the - or + button to adjust the settings.
Using the LCD Monitor Docking Station
If you wish to use the LCD Monitor without having to plug it into a mains socket, this can be
achieved by using the supplied Docking Station.
1 - Remove the base cover to access the battery compartment.
2 - Install 10x AA rechargeable batteries (not supplied.)
3 - Place the LCD Monitor onto the Docking Station.
To recharge the batteries, simply connect the Monitor PSU to the Docking Station and switch the
Mode Switch to Fast Charge. Charge time should be limited to 24 hours maximum.