Instruction manual
CTVM300LCDDM - DIGITAL WIRELESS CAMERA MONITORING SYSTEM
Page 06
Please read this instruction manual carefully prior to setting up
Preparing the LCD Monitor
Ensure that the Mode Switch on the back is
set to Camera.
2.
You can connect the LCD monitor to a TV,
VCR or Hi-Fi by connecting a 3.mm Jack to
Phono cable (not supplied) into the ‘AV OUT’
socket on the back.
4.
Connect the Monitor PSU to the socket la-
belled ‘DC 12V’ and plug it into an available
mains socket.
1.
Press the power button on the front of the
monitor. The ‘Power LED’ will change from
red to green and the AEI logo will appear on
screen.
3.