Instruction manual
DIGITAL WIRELESS CAMERA MONITORING SYSTEM - CTVM300LCDDM
Please read this instruction manual carefully prior to setting up
Page 05
Preparing the Camera
Switch the Camera on at the back. The
Power LED will change from red to green.
Position the camera in the desired location. If
you wish to attach the camera to a wall, use
the mounting bracket and supplied screws
after completing installation.
The Camera will transmit the sound and picture through walls and ceilings to the LCD Monitor.
1.
Connect the Camera PSU to the socket
labelled ‘DC 5V IN’ and plug it into an avail-
able mains socket. The Power LED will light
up red.
2.
3.