Instruction manual

CTVM300LCDDM - DIGITAL WIRELESS CAMERA MONITORING SYSTEM
Page 10
Please read this instruction manual carefully prior to setting up
Adding extra Cameras
This system can be expanded to include up to 4 Digital Wireless Cameras.
Follow the steps below for each additional camera you wish to add to your system.
Select Channel 2 using the button labelled
CH1-4 on the front of the Monitor.
1. 2.
Simultaneously press and hold the sync
buttons on both the new Camera and the
Monitor for 3 seconds. This will sync the
Camera to Channel 2 on the Monitor.
Press the button labelled CH1-4 to cycle
through the cameras assigned to each chan-
nel.
3.
If you wish to connect a wired camera to the
LCD monitor this can be achieved by using
the AV IN’ socket and switching the monitor
to ’AV IN’ mode.
4.