Operation Manual

10
Warning:
Use only the provided adaptor, using other power supplies may cause
a hazard.
Install the base unit in a position where the mains adapter plug will
reach an easily accessible mains socket. Never try to lengthen the
mains power cable.
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
7.2 Installing and charging the batteries (see P3)
tPlace the 2 supplied batteries into the battery compartment with the
polarity markings as shown. Use only the NiMH rechargeable battery
type provided.
tPosition the battery compartment cover over the batteries and slide
up to click into place.
tPut the handset on the base and charge for 15 hours before using
the handset for the first time. The handset will give a beep when it is
properly placed on the base or charger.
8 USING YOUR PHONE
8.1 Make a call
8.1.1 Preparatory dialing
Enter the phone number (up to 24 digits) and press
or to connect
to line and dial the number. When entering the number, if you make a
mistake, press
to delete digits.
8.1.2 Direct dialling
Press or to connect to the line and then enter the phone number.
Note:
If you enter a wrong digit, you cannot correct it with the
key.
8.1.3 Call from the phonebook
tPress
to access the phonebook and press / to select the
desired phonebook entry.