Operating instructions
23
Control ground RM 3.5
Connection to slave with 2A
Connection to slave with 2A
Control ground
RxD / connection to bus module
TXD / connection to bus module
Bus module recognition
Earth potential or if necessary screen trip line RM 3.5
+ 5V output e.g. for a set value poti (5 kR
Poti
10 k)
Sync. In (SYT-9 / QTM, see also chapt. 4.4)
Sync. Out (QTM)
Control ground
Analog set point input max. 10V, max. 20mA
Control ground
Pulse lock (PULSE INHIBIT)
Control ground
L2/N supply connection - synchr. voltage supply frequency RM 3.81
L2/N supply connection - synchr. voltage supply frequency RM 3.81
X 350 test jumper
X 2 is not applicable with the slave components of Thyro-A 2A
Fig. 4: Terminal plan
4.7 Operating elements and terminal strips
This chapter describes all terminal strips and jumpers.