User guide

8
7.6 Rings to answer
To set the number of rings before the machine answers a call.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “RINGS TO ANSWER”.
tPress the OK button
to confirm.
tPress the up
or down button to select “TOLL SAVER”, “2”, “3”, “4”, “5”, “6”, “7” , “8” or
“9” rings.
>The default setting is 5.
>Use “TOLL SAVER” when checking for messages from a remote location.The answering machine
responds after the 2nd ring only if you have a new message recorded. If there are no new
messages, the phone will answer after the 4th ring. You can then hang up after the 3rd ring to
avoid paying for the call.
tPress the OK button
to confirm.
tContinue with programming, or press the stop button
to return to standby mode.
7.7 Remote access
The remote access requires a three-digit code that you need to enter if you call when away from home
to check your messages. The default is “321“. You can change it to any three digits you want.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “REMOTE ACCESS”.
tPress the OK button
to confirm.
>The current three-digit code is shown, with the first digit blinking.
tPress the up
or down button to set the first digit of the remote access code.
tPress the OK button
to confirm.
>The second digit of the code will be blinking.
tPress the up
or down button to set the second digit of the remote access code.
tPress the OK button
to confirm.
>The third digit of the code will be blinking.
tPress the up
or down button to set the third digit of the remote access code.
tPress the OK button
to confirm the new remote access code setting.
the stop button
to return to standby mode.
7.8 TAM HD on/off setting
Two different compression rates (on and off) are provided for you to select the recording quality / total
recording time of incoming messages. With the compression rate set to on the recording quality will
be higher, but it will only save up to about 20 minutes of messages. With the compression rate set to
off the recording quality will be lower, but it will save up to about 40 minutes of messages.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “TAM HD: ON” (or “TAM HD: OFF”).
tPress the OK button
to confirm.
>The “ON“ (or “OFF“) will be blinking.
tPress the up
or down button to select “ON“ or “OFF“.
tPress the OK button
to confirm the TAM HD setting.