User guide

7
UK
tPress the up or down button until de display shows “SET TIME/DATE”.
tPress the OK button
to confirm.
>The year will be blinking.
tPress the up
or down button to set the year.
tPress the OK button
to confirm.
>The month will be blinking.
tPress the up
or down button to set the month.
tPress the OK button
to confirm.
>The date will be blinking.
tPress the up
or down button to set the date.
tPress the OK button
to confirm.
>The hour will be blinking.
tPress the up
or down button to set the hour.
>When setting the hour it is in 24 hour mode only.
tPress the OK button
to confirm.
>The minutes will be blinking.
tPress the up
or down button to set the minutes.
tPress the OK button
to confirm time and date setting.
tContinue with programming, or press the stop button
to return to standby mode.
7.3 Set flash time
You may need the flash function if your phone is connected to a PBX. Some PBX may need a longer
time, in which case you can change the setting from the options menu.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “SET FLASH TIME”.
tPress the OK button
to confirm.
tPress the up
or down button to select “100MS” (default), “300MS”, “600MS” or “1000MS”.
tPress the OK button
to confirm.
tContinue with programming, or press the stop button
to return to standby mode.
7.4 LCD contrast
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “LCD CONTRAST”.
tPress the OK button
to confirm.
tPress the up
or down button to select your comfortable display viewing level (1-5). The default
setting is 3.
tPress the OK button
to confirm.
tContinue with programming, or press the stop button
to return to standby mode.
7.5 Message length
To set the maximum recording time for each incoming message or memo message on the answering
machine.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “MESSAGE LENGTH”.
tPress the OK button
to confirm.
tPress the up
or down button to select 1 or 2 minutes.
>The default setting is 2 minutes.
tPress the OK button
to confirm the message length setting.
tContinue with programming, or press the stop button
to return to standby mode.