User manual

iso.org.dod.internet.mgmt.mib2.upsMIB

Please check your MIB directory before compiling the RFC1628!

Configure the NMS

• Set/compile the device MIB, if there is no standard UPS MIB RFC 1628 (CS121 only!)

• Add the SNMP adapter object to the management map and configuration of the events (e.g.

message to the operator)

• Ping the SNMP adapter

Due to the different compilation procedures of the SNMP software products, it is not possible

to explain the general procedures in greater detail. The compilation of a MIB file is explained in

the general SNMP software manuals. Please contact the support, if you cannot resolve errors

using this manual.

After the compilation the UPS software can be polled via a MIB browser and data can be read.

Please choose the corresponding MIB variable or string of MIB variable and set the destination

address TCP/IP of the adapter. The adapter will answer with the UPS data.

Alternatively the Windows UPSMON, JAVAMON or the UPS SNMP WATCH of the DataWatch

Pro Software can be used. The UPS data will then be displayed graphically and internal UPS

information, which are only useful to the technical support, will be hidden. In addition to this,

the UPS SNMP WATCH is able to manage groups of UPS devices, in order to manage parallel

redundant UPS systems.

As an optional add-on for the HP OpenView software, a snap-in may be ordered for

UPSMAN/CS121.

Note: (SNAP-IN FOR HP OPENVIEW for WINDOWS NT, SNAP-IN FOR HP

OPENVIEW for HP UNIX). This software implements itself into the HP

Openview Node Manager surface and displays UPS devices as objects

in the colors GREEN (OK), GREEN and RED (Alarm). With a mouse

click, the graphic window starts (JAVAMON or Windows UPSMON) and

displays current UPS data.

7. Troubleshooting – FAQ

Note: Since Troubleshooting and FAQs always need to be maintained and

actualized to the latest software or firmware release, we show the latest

informations only via our Website at www.generex.de. Please follow the

according link.